Tools and Accessories
Key Knife
With traditional Italian styling and attention to detail,our mold making key knife is the perfect tool for creating channels while cutting/separating a silicon mold from its modeled piece. The channels will allow the silicon mold to be put back together with strong interlocking sections preventing slippage.
$52.13 ex GST
Mould Makers Knife
This heavy high carbon steel knife with a 4" blade is used to remove mold sections, to cut rubber, and to clean mold walls. Its handle is made of wood. The blade is continuous through the wood for strength. Approximate length - 9".Made in U.S.A.
$43.43$30.40 ex GST
Aluminium Moulding Shim
Mold Dividing ShimThis thin flat piece of aluminum is used to divide your clay model into sections in preparation for the mold making process. Cut into appropriate lengths for your piece. Dimensions: 1 1/2" by 20'.Made in U.S.A.
$26.04$18.23 ex GST
INHIBIT X
Inhibit X® is a single component, low-viscosity liquid that provides an added measure of protection against cure inhibition when pouring platinum silicone rubbers over many surfaces including sulfur clay, instant adhesives, tapes, wood surfaces, some plastics, SLA resins and others.
$119.95 ex GST
Ease-Release 205
EASE RELEASE 205 is a versatile liquid release agent that is used for a variety mold making and casting applications. This product will release liquid urethane rubber from cured urethane rubber and a variety of surfaces. It will also release silicone rubber from itself and a variety of surfaces.
$49.95 ex GST
One Step Seal & Release - Pint
One Step™ is a convenient, economical liquid sealing agent and release agent in one. This low odor, low viscosity formula is offered as a “one step” alternative to using a sealing agent followed by a release agent during the mold making process using Smooth-On urethane mold rubbers. One Step™ will facilitate the release of cured urethane mold rubber from plaster, concrete, stone, brick, marble, limestone, wood, metal and other surfaces. Do not use on modeling clays.
$60.83 ex GST
URE-FIL 11
URE-FIL® 11 is a fiber-based filler that can be added to Smooth-On urethane and silicone rubbers, urethane plastics and epoxies to thicken for brush-on applications. URE-FIL® 11 can be used with all Smooth-On silicones, including those which do not respond to THI‑VEX® such as Mold Max® 40 and 60.
$43.43 ex GST
Quarry Tone® Granite Effects
Quarry Tone® Granite FX Fillers are specially blended powders that can be added to some Smooth-Cast® liquid plastics or liquid rubbers to create realistic stone effects in finished castings.
From $52.13 ex GST
Plat-Cat® Cure Accelerator
Platinum Silicone Cure Accelerator. Additive designed to accelerate the cure time of Smooth-On platinum silicone rubber products.
$121.70 ex GST
SLO-JO® Platinum Silicone Cure Retarder
Additive designed to extend the pot life (working time) of Smooth-On platinum silicone rubber products and Soama Foama® silicone foam
$43.44 ex GST
Mixing Cups 600ml 10 pack
Cost Effective 600ml printed cups for mixing and measuring a variety of moulding rubbers, foams and resins. These cups have measurements from 50ml-600ml and ratio measurements of 2:1, 3:1, & 4:1. The measurements take away the guess work from inaccurate mix ratio's.
$8.65 ex GST
PolyBond Polyurethane Adhesive 2 lb
A polyurethane adhesive that’s great for repairing torn polyurethane molds. PolyBond is mixed 1A:3B by weight, has a 3-minute working time and a 15-minute cure time. Very strong!For a quick tutorial on repairing torn polyurethane molds with PolyBond, read this “Tek-Tip” on the Polytek Blog.
$130.39$91.27 ex GST
Poly Plastilina 1 lb Block
A non-hardening, sulfur-free modeling clay. Non-toxic and odorless with a smooth, firm consistency for sculpting. Also makes a great reuseable caulk for mold boxes and mold shells (mother molds) to make them liquid tight.
$11.25 ex GST
Chavant Fill It Clay 1 lb
Fill-It is a sulfur free clay used by mold makers to seal mold boxes, build dams, set parting lines/shims and repair cracks.
$11.25 ex GST
Shellac
Shellac Liquid sealer (french polish). The traditional sealer for plaster moulds or patterns,
$34.74$24.32 ex GST
