Silicone

Platinum-Cured Silicone Mould Rubbers

No release agent needed for most casting applications, no shrink on cure, cured rubber has long storage life, high strength, excellent chemical resistance. Higher cost, cure inhibited by some surfaces. Most materials, especially resins, foams and some low-melt metals.

Tin-Cured Silicone Mould Rubbers

No release agent needed for most casting applications, high strength, excellent chemical resistance. Higher cost, shrinks on cure (~1%), cured rubber has limited storage life. Most materials, especially resins, foams and some low-melt metals. Pour, Brush, Spray.

SAMS Simply the Best Platinum Silicone
AMAZING VALUE

SAMS Simply the Best 1kg Silicone

We (SAMS) have chosen this silicone as Its simple, fast, affordable, easy and versatile. Its also translucent so you can see the cut lines you need to make on a one piece mould.Thats why we call it 'SIMPLY THE BEST" NB: DO NOT USE WITH OIL BASED CLAYS OR PLASTILINA.

$43.44 ex GST

Platsil Silicone 71.11

Platsil Silicone 7111

PlatSil® 71-11 is a fast-curing, soft (A10) platinum silicone liquid mold rubber with a 1A:1B mix ratio. Molds made from this rubber offer great flexibility for molding and casting complicated and intricate models with undercuts.

From $52.13 ex GST

7120 Silicone

Platsil Silicone 7120

PlatSil® 71-20 is a fast-curing, 1A:1B mix, mid-range hardness platinum silicone liquid mold rubber. Molds made from PlatSil 71-20 are quite flexible and are great for intricate models with undercuts.

From $52.13 ex GST

7315 Plastsil

PlatSil Silicone 7315

PlatSil® 73-15 has a Shore A15 hardness and is a 1A:1B mix, super low-viscosity (2500 cP) platinum silicone liquid mold rubber that cures to a clear/translucent color.

From $52.13 ex GST

Platsil Silicone 73.20

Platsil Silicone 7320

PlatSil 73-20 has the lowest viscosity of all Polytek platinum silicone rubbers. It also has the shortest working time (5 min) and demold time (1 hr) of the 73-Series rubbers. Molds made from PlatSil 73-20 are often used to cast the following materials: resin (polyurethane, epoxy, polyester resin), wax, soap, plaster, and more...

From $52.13 ex GST

7325 Silicone

Platsil Silicone 7325

PlatSil® 73-25 is a 1A:1B mix, platinum silicone rubber that cures to a soft/mid-range hardness of A25. A 15-minute pour time coupled with a 4-5 hour demold time.

From $52.13 ex GST

7340 Silicone

Platsil Silicone 7340

PlatSil® 73-40 is a mid-range hardness (A40) platinum silicone rubber designed for making long-lasting, flexible molds to cast liquid plastics or rubbers (polyurethanes, polyesters and epoxies) as well as polyurethane foams.

From $52.95 ex GST

Plastil Silicone Gel 00

PlatSil Silicone Gel 00

PlatSil Gel-OO is similar to PlatSil Gel-10 and PlatSil Gel-25 in all respects except in its Shore hardness. Gel-OO is measured on the Shore OO scale as an OO-30. It offers a 1:1 mix ratio, 6-minute working time and 30-minute demold time.

From $52.13 ex GST

Gel 10

Platsil SIlicone Gel 10

PlatSil® Gel-10 is a unique, 1A:1B mix, liquid platinum silicone rubber with a 5-6 minute working time and a 30-minute demold time. It cures to a Shore A10 hardness. Use PlatSil Gel-10 as a mold rubber, to create prosthetic appliances, as well as for lifecasting.

From $52.13 ex GST

Gel 25

Platsil Silicone Gel 25

PlatSil® Gel-25 is a Shore A25 hardness, 1A:1B mix ratio, liquid platinum silicone rubber with a five-minute pour time and a one-hour demold time. Use PlatSil Gel-25 as a mold rubber, to create prosthetic appliances and for life casting. PlatSil Gels are widely used for specials effects in television, theatre and film.

From $52.13 ex GST

Tinsil 7060

TinSil 7060

TinSil® 70-60 is a high hardness, 5A:100B mix, tin silicone liquid rubber that is designed to make molds for casting low melting (~600°F) metals (e.g., pewter, pewter blends, limited leads). No release agent needed for most applications.TinSil 70-60 has limited tear strength because of its hardness.

From $80.00 ex GST

platthix

PlatThix Liquid Thickening Agent

Add PlatThix to PlatSil® 71, 73 and Gel-10 Series products to create a consistency useful for making brushed molds or for layering in the case of PlatSil® Gel-10 skins or appliances.

$60.00 ex GST

SAMS Spectre Silicone

SAMS Spectre Silicone

SAMS Spectre is a 1A:1B mix, super low-viscosity (2500 cP) platinum silicone liquid mold rubber that cures to a clear/translucent color. Spectre has a A15 Shore Hardness.

From $43.44 ex GST

Silicone Pourable Starter Kit
NEW

Silicone Pourable Starter Kit

Starter Kits are a great way to introduce anyone to the world of mold making and casting! Print and video instructions take you step-by-step through the process. Great for inventors, artists, candle makers, students, arts & crafts enthusiasts and more!

$149.95 ex GST

SAMS Mean Green Platinum Silicone Rubber.
SAMS

SAMS Mean Green

Mean Green is a platinum Silicone Rubber. Great general Silicone with low mixed viscosity - allowing for easy bubble release.

From $43.44 ex GST

PURPLE RAIN

SAMS Purple Rain Silicone

Purple Rain is a mid-range hardness platinum silicone liquid mould rubber. Excellent for brush moulds. Moulds made from Purple Rain are quite flexible and are great for intricate models with undercuts.

From $43.44 ex GST

SAMS Rush Hour Silicone

SAMS Rush Hour Silicone

A platinum Silicone Rubber with a 5 min gel time and a 60 minute de-mould time. Ratio is 1:1 and shore hardness is 22A.

From $43.44 ex GST

SAMS Gellyfish Silicone
AMAZING VALUE

SAMS Gellyfish Silicone

Gellyfish is a fast-curing, soft platinum silicone gel liquid mould rubber.Moulds made from this rubber offer great flexibility for moulding and casting complicated and intricate models with undercuts

From $43.44 ex GST

TinSil 70-20 Silicone Rubber

TinSil 70-20 Silicone Rubber

TinSil® 70-20 Silicone Rubber is a two-part, tin-catalyzed, liquid silicone system that cures (RTV) to a blue, Shore A20 rubber. This is a pourable rubber, but it can be easily thickened with TinThix Liquid Thickener or Fumed Silica for brush-on application.

$1,216.00 ex GST

TinSil 70-25 Silicone Rubber

TinSil 70-25 Silicone Rubber

TinSil® 70-25 Silicone Rubber is a two-part, tin-catalyzed, liquid silicone system that cures (RTV) to a blue, Shore A25 rubber. This is a pourable rubber, but it can be easily thickened with TinThix Liquid Thickener or Fumed Silica for brush-on application.

$1,216.00 ex GST

Ecoflex 20

Ecoflex 20

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

$69.52 ex GST

TinSil 80-30 Silicone Rubber

TinSil 80-30 Silicone Rubber

From $390.00 ex GST

Poly Sil Silicone Fluid (50 CP)
CLEARANCE SALE

Poly Sil Silicone Fluid (50 CP)

This very low-viscosity silicone fluid can be added sparingly to liquid PlatSil® and TinSil® silicone rubbers to thin the mix.

From $50.00 ex GST

Mold Max 30

Mold Max 30

Mold Max™ Silicones are tin-cured silicone mold rubber compounds that have exceptional working properties and library life.

$69.00 ex GST

SuperSeal and Ease Release 205
NEW

SuperSeal and Ease Release 205

Super Seal and Ease release 205 4oz kit

$39.95 ex GST

Silicone Brush-0n Starter Kit
NEW

Silicone Brush-0n Starter Kit

Everything you need for making molds of flat or 3-D models and ideal for vertical application. Includes all materials for making a brush-on mold. Step-by-step instructions will guide you through the process. Print and video instructions take you step-by-step through the process. Great for inventors, artists, candle makers, students, arts & crafts enthusiasts and more!

$156.48 ex GST

FAST & FURIOUS 10 is for those fast moulding jobs.

SAMS Fast & Furious 10

FAST & FURIOUS 10 is for those fast moulding jobs. Moulds made from this rubber offer great flexibility for moulding and casting complicated and intricate models with undercuts.

From $43.44 ex GST

FAST & FURIOUS 25 is for those fast moulding jobs that need a slight harder moulding silicone rubber.

SAMS Fast & Furious 25

FAST & FURIOUS 25 is for those fast moulding jobs that need a slight harder moulding silicone rubber.

From $43.44 ex GST

Second Skin 00

Second Skin OO is a skin Safe Silicone similar to the Second Skin 10 and 25 in all respects except in its Shore hardness. Gel-OO is measured on the Shore OO scale as an OO-30. It offers a 1:1 mix ratio, 6-minute working time and 30-minute demould time.

From $43.00 ex GST

Ecoflex® 00-10 - Super-Soft, Addition Cure Silicone Rubbers

Ecoflex® 00-10

Super-Soft, Addition Cure Silicone Rubbers. Very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

$69.52 ex GST

Ecoflex® 00-50 - Super-Soft, Addition Cure Silicone Rubbers

Ecoflex® 00-50

Super-Soft, Addition Cure Silicone Rubbers. Very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

$69.52 ex GST

Solaris® - Clear Silicone Encapsulating Rubber

Solaris® Clear Encapsulant

Clear Silicone Encapsulating Rubber. Designed for use in protecting of electronic components and other assemblies. It will protect components against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards.

$156.48 ex GST

Ecoflex® GEL - Platinum Cure Silicone Rubber For Special Effects

Ecoflex® GEL

Platinum Cure Silicone Rubber For Special Effects. Extremely soft, platinum silicone rubber gel specifically designed for creating silicone makeup appliances, for cushioning, creating gaskets, encapsulation, and other applications requiring a very soft silicone material.

From $78.22 ex GST

Ecoflex® 00-30 - Super-Soft, Addition Cure Silicone Rubbers

Ecoflex® 00-30

Super-Soft, Addition Cure Silicone Rubbers. Very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

$69.52 ex GST

Soma Foama® 25 - Flexible Platinum Silicone Foams

Soma Foama® 25

Flexible Platinum Silicone Foams. Can be used for a variety of industrial and special effects applications.

From $86.91 ex GST

Dragon Skin® 10 NV - Addition Cure Silicone Rubber Compound

Dragon Skin® 10 NV (non-vacuum)

Addition Cure Silicone Rubber Compound. Suitable for making molds of any configuration for casting plasters, wax, low-melt temperature metal alloys, resins and other platinum silicones. Compatible with other Dragon Skin® rubbers and is also suitable for special effects applications

$78.22 ex GST

Dragon Skin® 30 - Addition Cure Silicone Rubber Compounds

Dragon Skin® 30

Addition Cure Silicone Rubber Compounds. Used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials.

$78.22 ex GST

Dragon Skin® 10 MEDIUM - Addition Cure Silicone Rubber Compounds

Dragon Skin® 10 MEDIUM

Addition Cure Silicone Rubber Compounds. Used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials.

$78.22 ex GST

SORTA-Clear® 18 - Addition Cure Silicone Rubber Compounds

SORTA-Clear® 18

Addition Cure Silicone Rubber Compounds. SORTA-Clear® silicones are ideal for making prototype, jewelry or other molds of any configuration where model visibility is important.

$95.61 ex GST

Mold Star® 16 FAST - 1A:1B Mix By Volume Platinum Silicone Rubbers

Mold Star® 16 FAST

1A:1B Mix By Volume Platinum Silicone Rubbers. Good for casting wax, gypsum, resins, concrete and other materials.

$69.52 ex GST

Mold Star® 30 - 1A:1B Mix By Volume Platinum Silicone Rubbers

Mold Star® 30

1A:1B Mix By Volume Platinum Silicone Rubbers. Good for casting wax, gypsum, resins, concrete and other materials

From $69.52 ex GST

Rebound™ 25 - Brushable Platinum Silicone Rubbers

Rebound™ 25

Brushable Platinum Silicone Rubbers. Soft, flexible and is good for making molds of models with deep undercuts. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.

From $69.52 ex GST

Rebound™ 40 - Brushable Platinum Silicone Rubbers

Rebound™ 40

Brushable Platinum Silicone Rubbers. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.

From $69.52 ex GST

Dragon Skin® 10 FAST - Addition Cure Silicone Rubber Compounds

Dragon Skin® 10 FAST

Addition Cure Silicone Rubber Compounds. High performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials.

From $78.22 ex GST

Dragon Skin® 10 VERY FAST - Addition Cure Silicone Rubber Compounds

Dragon Skin® 10 VERY FAST

Addition Cure Silicone Rubber Compounds. Great for Making Molds for a Variety of Applications - can be used to make exceptionally strong and tear resistant molds for casting plaster, wax, concrete, resins and other materials.

From $78.22 ex GST

Dragon Skin® 20 - Addition Cure Silicone Rubber Compounds

Dragon Skin® 20

Addition Cure Silicone Rubber Compounds. Used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials.

$78.22 ex GST

Dragon Skin® FX‑ Pro - Platinum Cure Silicone Rubber For Special Effects

Dragon Skin® FX‑ Pro

Platinum Cure Silicone Rubber For Special Effects. High performance platinum silicone rubber specifically designed for creating silicone makeup appliances and skin effects.

From $78.22 ex GST

Smooth-Sil™ 940 Addition Cure Silicone Rubber Compounds

Smooth-Sil™ 940

Addition Cure Silicone Rubber Compounds. Smooth-Sil™ Platinum Silicones are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete. Smooth-Sil™ 940 is suitable for food related applications.

From $104.30 ex GST

Mold Max® 60 - High Heat Resistant Silicone Rubber Compound

Mold Max® 60

High Heat Resistant Silicone Rubber Compound. Applications include making foundry patterns, flat pattern reproductions and casting low-melt metal alloys such as tin and pewter.

$60.83 ex GST

Equinox® 38 Medium Mix & Apply-By-Hand Platinum Mold Putty
FOOD SAFE

Equinox® 38

Mix & Apply-By-Hand Platinum Mold Putty. Applications include making fast mold impressions from almost any surface, orthotics / orthopedic, equine hoof repair, jewelry making and more.

$113.00 ex GST

Platsil7110

Platsil Silicone 7110

PlatSil® 71-10 is a unique, fast-curing, soft (A10) platinum silicone liquid mold rubber. This low-viscosity (3500 cP) silicone has a 5-minute pour time and a 30-minute demold time; these are the fastest pour and demold times in the 71-Series.

From $52.13 ex GST

platsil 7360

Platsil Silicone 7360

PlatSil® 73-60 is a 1A:10B mix, platinum silicone liquid mold rubber. With a Shore hardness of A60, it is the hardest Polytek® platinum silicone rubber currently available. Molds made from this liquid rubber provide long library life, high-performance, great chemical resistance, dimensional stability, and no shrinkage on cure.

From $400.00 ex GST

Platsil Silicone 7140

PlatSil® 71-40 is a 1A:5B mix, mid-range hardness, clear platinum silicone mold rubber. Its clarity makes it most useful for prototype molds where seeing the model helps define parting lines and for filling the mold when casting.

From $400.00$390.00 ex GST

Courier

$10.00 ex GST