Additives - Casting
Smith Theatrical Deadener
Smith’s Theatrical Prosthetic Deadener is an additive for PlatSil® Gels. It is used to simulate the look and feel of skin or human tissue. Adding up to 250% Deadener of the PlatSil Gel mixture (Part A+ Part B) can be used to create a super-gel, which is extremely soft and sticky (can be self adhered to actor/actress’ skin and reused). Any level up to 250% can be used to mimic the slow stretch and recovery properties of human tissue. Great for silicone gel filled appliances and special effects.
From $120.00 ex GST
SO-CURE® - Accelerator for Poly Plastics
SO-CURE® Cure Accelerator is an additive designed to accelerate the cure time of some Smooth-On urethane liquid plastic products without significantly affecting ultimate physical properties.
$23.43 ex GST
XTEND-IT® - Dry Gas Blanket
XTEND-IT® is a dry gas blanket designed to extend the shelf life of unused moisture sensitive polyurethane products.
Kick-It® - Accelerator for Poly Rubbers
Smooth-On Kick-It® Cure Accelerator is an additive designed to “accelerate” the cure time of Smooth-On VytaFlex®, ReoFlex® and PMC® rubber products
$52.13 ex GST
406 Colloidal Silica Powder
406 Colloidal Silica is a thickening agent for polyurethanes rubbers for brush on moulds. This Fumed Colloidal Silica can be used to thicken resins for Mother moulds by adding varying amounts. Commonly known as Cabosil or Aerosil.
From $13.50 ex GST
Pol-Ease 2300 Aerosol Spray
Pol-Ease 2300 is an effective release for most Polytek products other than Silicones. It should not be used before pouring or brushing liquid silicone mold rubber – in this case Pol-Ease 2500 is the proper choice.
$39.09 ex GST
Pol-ease 2500 Release Agent
Pol-Ease 2300 is an effective release for most Polytek products but should not be used before pouring or brushing liquid silicone mold rubber – in this case Pol-Ease 2500 is the proper choice.
$39.09 ex GST
Bronze Powder
Bronze powder can be added to Poly Plastics such as EasyFlo 60, EasyFlo Clear, EasyFlo 120, and other Polytek plastics to create cold cast bronze objects.
From $70.00 ex GST
14X Catalyst
Poly-Optic® 14 Part X is a catalyst that can be mixed into Part B of Poly-Optic products before adding Part A to accelerate gel time and cure time
From $20.00 ex GST
74/75 Accelerator
Poly 74/75 Part X Accelerator is used in small amounts to accelerate the cure of 74 Series, 75 Series and 77 Series liquid polyurethane rubbers. The addition of this product will also reduce the working time.
From $30.00 ex GST
15X Catalyst
Poly 15 Part X is an accelerator that can be added to 15-Series polyurethane liquid plastics to accelerate gel times and cure times
From $20.00 ex GST
74/75 Part C softener
Poly 74/75 Part C Softener is an additive that can be added to the liquid 74 Series, 75 Series and 77 Series polyurethane rubbers to reduce their mixed viscosity and to soften the cured rubber.
From $200.00 ex GST
UV additive
Thoroughly stir this liquid additive into polyurethane liquid rubbers and plastics to improve exterior durability; greatly reducing characteristic surface degradation caused by UV light sources. Add up to 1% of the total weight of liquid mix prior to curing.
From $25.00 ex GST